MA
Maker Atlas
Ortur Aufero AL1 laser engraver — Ortur

4 manufacturer photos · 1 / 4

Ortur · Diode

Ortur Aufero AL1

Compact portable Ortur — desk-friendly engraver for small gifts

Last updated How we evaluate

What this machine is for

Small-footprint Ortur for gift engraving & learning on a budget

Reference benchmark same job size on every machine so you can compare times fairly.

Laser spot size

~0.12 mm spot

Smaller spot = finer detail (frame motion is usually the same across tiers)

Motion precision: 0.01 mm

Sample engrave job

~18–28 min

Filled photo or logo on birch plywood

10 × 10 cm (4 × 4 in)

Sample cut job

~12–18 min

Simple square cut-out from 3 mm basswood

10 × 10 cm (4 × 4 in)

Times are estimates for the reference job above; your design complexity and settings will change them.

TL;DR

The Aufero AL1 is Ortur's compact diode line for small work areas and portable setups. Lower power than LM3 or H10, but easier to fit on a crowded desk. Best for light engraving — not a cutting workhorse.

What this machine is for

Compact entry Ortur for small gift engraving and learning laser basics.

Best for

Small giftsDesk space limitsFirst laser experimentsPortable setups

Materials

Engraves

  • · Wood
  • · Leather
  • · Paper
  • · Anodized aluminum (light)

Cuts

  • · Paper
  • · Thin basswood 2–3 mm
  • · Thin fabric

Cannot do

  • · Thick wood cuts
  • · Large signs
  • · Bare metal
  • · Production runs

Pros

  • ✓Very compact footprint
  • ✓Low entry price
  • ✓Ortur brand support
  • ✓Simple first-laser learning curve
  • ✓LightBurn compatible

Cons

  • ✗Small work area limits project size
  • ✗5W is slow on 10×10 cm fills
  • ✗Not competitive vs LM3 for value long-term
  • ✗Limited cutting capability
  • ✗Open frame safety requirements

Beginner notes

Good if you only engrave small items like keychains and tags. If you might outgrow it within months, save for Ortur LM3 instead.

Pro tips

Use smaller benchmark jobs (5×5 cm) for photos on AL1 — 10×10 cm fills take noticeably longer at 5W.

Pro / technical specs

Raw numbers for experienced users comparing machines.

Laser spot size
~0.12 mm spot
Max speed (spec)
200 mm/s
Avg engrave speed
50–120 mm/s fill
Avg cut speed
2–6 mm/s on 2–3 mm wood
Motion precision
0.01 mm