4 manufacturer photos · 1 / 4
TwoTrees · Diode
TwoTrees TTS-20 Pro 20W
TwoTrees TTS-20 Pro — 20W with rotary-ready frame
Last updated How we evaluate
Released December 2023
What this machine is for
Budget TwoTrees 20W for engraving and light cutting
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
TwoTrees TTS-20 Pro 20W is a 20W open-frame in the TTS line with rotary and riser bundle options. Budget alternative to TTS-55 Pro — good for 20W without paying for 40W class.
What this machine is for
Entry-mid TwoTrees 20W for hobby engraving and cutting.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Acrylic (dark)
Cuts
- · 5 mm basswood
Cannot do
- · TTS-55 40W power
- · Premium build
Pros
- ✓Lower cost than TTS-55 Pro
- ✓Rotary options
- ✓Active TwoTrees sales
Cons
- ✗Smaller bed than TTS-55
- ✗Less community than Sculpfun
- ✗Open frame
Beginner notes
Step up to TTS-55 40W tier if cutting thick wood often.
Pro tips
TR2 rotary bundle is the common tumbler upgrade path.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm