4 manufacturer photos · 1 / 4
ComMarker · Uv
ComMarker Omni 1 UV
Entry UV desktop engraver for glass and plastics
Last updated How we evaluate
Released June 2024
What this machine is for
Entry UV engraving for glass and plastic gifts
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.03 mm UV spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~8–14 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
Not a cutter
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
ComMarker Omni 1 is the more compact UV line for makers entering glass and plastic marking. Same caveats as all UV: material testing, eye protection, and realistic speed expectations.
What this machine is for
Hobby and small-business UV marking on glass and plastics.
Best for
Materials
Engraves
- · Glass
- · Plastics
- · Leather (light)
- · Paper
Cuts
- · Limited cutting ability
Cannot do
- · Metal
- · Thick wood
- · Large CO₂-style cutting
Pros
- ✓Lower entry price than Omni X
- ✓Compact
- ✓Good for glass gift niche
Cons
- ✗Smaller work area
- ✗Slower production
- ✗Not for metal at all
Beginner notes
Pair with a diode or CO₂ if you need wood/acrylic cutting — UV is specialized.
Pro tips
Mask glass for crisp white marks. Ventilate — some plastics off-gas.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.03 mm UV spot
- Max speed (spec)
- 2,500 mm/s
- Avg engrave speed
- 80–300 mm/s
- Avg cut speed
- N/A
- Motion precision
- 0.01 mm