3 manufacturer photos · 1 / 3
OMTech · Fiber
OMTech FC-44 Intelli
Compact OMTech Intelli fiber — mid-size cutting/marking platform
Last updated How we evaluate
Released April 2024
What this machine is for
Mid-format fiber for metal-focused small businesses
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~2–5 min
Filled logo on stainless steel plate
10 × 10 cm (4 × 4 in)
Sample cut job
Not a cutter
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
OMTech FC-44 Intelli is a smaller fiber system than FC-105 for shops that need metal capability without full industrial footprint. Still a business machine — not a replacement for desktop diode or galvo fiber markers.
What this machine is for
Mid-size fiber system for metal cutting and production marking.
Best for
Materials
Engraves
- · Metal
Cuts
- · Sheet metal (thin)
Cannot do
- · Wood shop
- · Hobby gifts only
Pros
- ✓Smaller than FC-105
- ✓Intelli software features
- ✓OMTech dealer network
Cons
- ✗Still costly
- ✗Not portable
- ✗Learning curve
Beginner notes
Compare desktop galvo fiber if you only need marking, not cutting.
Pro tips
Plan install space, exhaust, and chiller maintenance up front.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- Fiber
- Motion precision
- 0.01 mm