4 manufacturer photos · 1 / 4
LaserPecker · Diode
LaserPecker LP1 Pro
Pocket LaserPecker — ultra-portable 5W for stamps and tiny gifts
Last updated How we evaluate
Released June 2021
What this machine is for
Pocket engraving for stamps, tags, and travel demos
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
LaserPecker LP1 Pro is a pocket-sized 5W engraver for maximum portability. Legacy line compared to LP4/LP5 — still relevant on used market for micro projects only.
What this machine is for
Pocket micro-engraving for personalization on the go.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Paper
- · Plastic
Cuts
- · Paper
Cannot do
- · Any production work
- · Thick cuts
- · Metal without newer LP models
Pros
- ✓Truly pocketable
- ✓Simple app workflow
- ✓Fun demos
Cons
- ✗Very low power
- ✗Old generation
- ✗Tiny bed
Beginner notes
Not a workshop laser — treat as a gadget or second machine.
Pro tips
LP4 is the better modern portable if buying new from LaserPecker.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm