4 manufacturer photos · 1 / 4
Ortur · Diode
Ortur Laser Master 2 Pro
Classic Ortur LM2 Pro: legacy open-frame (used market)
All Ortur models →Add to compare →
Last updated How we evaluate
Released March 2021
TL;DR
Ortur Laser Master 2 Pro is a discontinued Ortur classic still found used. Fine for learning if cheap; new buyers should choose LM3, H10, or H20 instead.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Open-frame : plan safety first
There is no factory enclosure: you wear OD-rated glasses, control smoke, and keep kids/pets away. You trade cabinet convenience for price and access : fine in a dedicated workshop, stressful in a living room without a plan.
LightBurn compatible
LightBurn support means advanced layers, camera tools, and workflows many makers outgrow the stock app with. Confirm your exact controller board before assuming full features : some machines need a paid license separately.
Our verdict
Ideal if you
Ortur Laser Master 2 Pro 10W suits makers who sell marks, photos, and gifts more than daily panel cutting. Reasonable open-frame entry price.
Skip if you
Skip if you already quote 3 mm+ cutting in production. Not for cast acrylic or bare metal without spray.
Pros
- 10W on Ortur Laser Master 2 Pro: engraving-first: photo fills and leather at moderate speeds
- Open-frame: plan laser glasses, exhaust, and workspace rules from day one
- Software on the profile: trial your workflow on scrap before production
Cons
- Clear cast acrylic and thick production cutting still favor CO₂, not diode power alone
- Confirm optical wattage on the listing before you buy
What this machine is for
Budget used-market Ortur for basic engraving
Legacy Ortur open-frame for hobby engraving on a budget.
Laser spot size
~0.08 mm spot
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
10 × 10 cm (4 × 4 in)
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Wood
- · Leather
- · Paper
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Recommended
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile covers Ortur Laser Master 2 Pro. Read the TL;DR and benchmarks before buying, then compare nearby models on the Compare page.
Pro tips
Flash firmware carefully: many LM2 guides still online.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 15,000 mm/s traverse
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
Alternatives to the Ortur Laser Master 2 Pro
Machines in the same space, picked from our database by type, price, and score.
Ortur · Diode · $140 – $1,740
The 10W Laser Master 3 is Ortur's lower-power SKU on the same frame. Ideal for learning and engraving; cutters should choose the 20W version.
Ortur · Diode · $110 – $210
The Aufero AL1 is Ortur's compact diode line for small work areas and portable setups. Lower power than LM3 or H10, but easier to fit on a crowded desk. Best for light engraving: not a cutting workhorse.
Sculpfun · Diode · $299 – $449
Sculpfun S9 10W is the 10W SKU on the Sculpfun sculpfun s9 line. Before S30 Ultra, the S9 was Sculpfun's workhorse. Verify optical power on the listing: do not assume combined-watt marketing.